Wall Mounting - Moxa Technologies EtherDevice User Manual

Wall Mounting

For some applications, you will find it convenient to mount MOXA EtherDevice Server on
the wall, as illustrated below.
STEP 1: Remove the green plastic DIN-Rail attachment plate from MOXA EtherDevice
Server's rear panel, and then attach the wall mount plates, as shown in the
diagram below. Note that each plate has three rows of two screw holes—use
whichever row of screw holes is most appropriate for your application. You
should also differentiate between the top plate and bottom plate, as indicated
below. Once the plates are attached, the keyhole shaped apertures should be such
that the large part of the hole is at the bottom of the keyhole.
2-4 MOXA EtherDevice Server User's Manual
⇒ ⇒ ⇒ ⇒