Moxa Technologies EtherDevice User Manual page 85

STEP 2
Plug one end of your cable into port 1, the other end into port 2, and then press Enter from
the Console utility, or click on Test from the Web Browser interface:
STEP 3
Examine the results of the test. There are three possible responses:
1. The cable is not wired correctly or has a short.
2. Straight-through cable
3. Cross-over cable
STEP 4
Exit Cable-test mode.
MOXA EtherDevice Server User's Manual 6-35
Featured Functions
Console:
Press Enter
to start
testing your
Ethernet
cable
Web Browser:
Click on Test to
start testing your
Ethernet cable