Telnet Console - Moxa Technologies EtherDevice User Manual

Telnet Console

You may use Telnet to access MOXA EtherDevice Server's console utility over a network.
NOTE Before accessing the console utility via Telnet, first connect one of MOXA EtherDevice
Server's RJ45 Ethernet ports to your Ethernet LAN, or directly to your PC's Ethernet NIC.
You should be able to establish a connection by using either a straight-through or
cross-over Ethernet cable. However, if you experience connection difficulties, refer to the
Auto MDI/MDI-X Connection section from Chapter 4 for more information about the
different types of Ethernet cables and ports.
NOTE
MOXA EtherDevice Server's default IP is: 192.168.127.253
Use the following procedure to access the console utility via Telnet.
1. Telnet to MOXA EtherDevice Server's IP address from Window's Run window (or
from the MS-DOS prompt).
2. Type 1 to choose ansi/vt100, and then press Enter.
6-8 MOXA EtherDevice Server User's Manual