Din-Rail Mounting - Moxa Technologies EtherDevice User Manual

DIN-Rail Mounting

For many industrial applications, you will find it convenient to attach MOXA EtherDevice
Server to a DIN-Rail, as described below. The green plastic DIN-Rail attachment plate
should already be fixed to the back panel of EDS when you take it out of the box. If you
need to reattach the DIN-Rail attachment plate to EDS, be sure the stiff metal spring is
situated towards the top, as shown in the figures below.
STEP 1: Insert the top of the DIN-Rail into
the slot just below the stiff metal
spring. Apply a few pounds of
downward force on the top rear of
the server, and then rotate the
server as shown below.
To remove MOXA EtherDevice Server from the DIN-Rail, simply reverse Steps 1 and 2
above. Grasp EDS with both hands, apply a slight amount of downwards force at the top
rear of the server, and then rotate the bottom of the server towards its front panel. When the
bottom of the DIN-Rail loses contact with the attachment plate, simply lift the server up
and away from the DIN-Rail.
Installing MOXA EtherDevice Server
STEP 2: The DIN-Rail attachment unit
MOXA EtherDevice Server User's Manual 2-3
will snap into place as shown
below.