Event Types - Moxa Technologies EtherDevice User Manual

NOTE Warning e-mail messages will have sender given in the form:
Moxa_EtherDevice_Server_0001@Server_Location
where Moxa_EtherDevice_Server is the default Server Name, 0001 is EDS's serial
number, and Server_Location is the default Server Location.
Refer to the Advanced Settings section from Chapter 6 to see how to modify Server Name
and Server Location.

Event Types

Event Types can be divided into two basic groups: Server Events and Port Events. Server
Events are related to the overall function of the Server, whereas Port Events are related to
the activity of a specific port.
Server Cold Start
Server Warm Start
Power Transition (On Off)
Power Transition (Off On)
Configuration Change Activated
Comm. Redundancy Topology
Changed
Authentication Failure
Server Event
MOXA EtherDevice Server User's Manual 6-19
Featured Functions
Warning e-mail is sent when...
Power is cut off and then reconnected.
EDS is rebooted, such as when network parameters
are changed (IP address, netmask, etc.).
EDS is powered up.
EDS is powered down.
Any configuration item is changed.
If any Spanning Tree Protocol servers have changed
their position (applies only to the root of the tree).
An incorrect password is entered.