Table of Contents
Advertisement
Maintenance and Tips
Troubleshooting
If you have a question that isn't answered in this Owner's Manual, visit our
website at www.LifeSpanFitness.com or call us at 877.654.3837 x4.
The treadmill is designed and manufactured to be reliable and easy-to-use.
However, if you have a problem, these troubleshooting steps may help you find
the cause.
Problem: The belt does not stay in the center of the treadmill when in use.
Solution: First check to make sure that the treadmill is level, then refer to the
instructions in this Owner's Manual on how to align the belt.
Problem: The treadmill belt slips during use.
Solution: The belt may need to be tensioned after a period of use. Refer to the
Belt Tensioning Section of this Owner's Manual.
Problem: E01 Error Code.
Solution: Communications problem. Check connections inside motor
compartment. If this does not help, replace motor control board.
Problem: E02, E05 Error Code.
Solution: Too much current going through motor control board. Replace the
motor control board.
Problem: E07 / E08 Error Code.
Solution: The motor control board is damaged. Replace the motor control
board.
Problem: "----" Shows in Display.
Solution: The Safety Key is missing. The Safety Key is not connected to the
console or is not pushed in all the way.
32
Advertisement
Table of Contents
