Avermedia AVerDiGi EB3004 NET User Manual page 37

OSD MENU
SENSOR SETUP
SENSOR1 SENSOR2 SENSOR3 SENSOR4
ENABLE
TYPE
NO NO
MOTION DETECTION SETUP
CH1 CH2
ENABLE
SENSTIVITY
5
MASK SETUP
MAIN MENU
CAMERA/RECORD
DISPLAY
SCHEDULE
EVENT SETUP
STORAGE
NETWORK
SYSTEM
Description
SENSOR
Customize the initial state of the attached sensor.
NO NO
ENABLE
Active/deactivate the sensor.
TYPE
Select the state of the sensor.
- NO: Indicates that the initial state of the sensor is normal open. Video
recording initiates when there is a changes in the sensor state
- NC: Indicates that the initial state of the sensor is normal close. Video
recording initiates when there is a changes in the sensor state
MOTION DETECTION
CH3 CH4
Setup motion detection. The motion detection setup will relate to the
5 5 5
MOTION DETECTION in ALARM SETTING.
ENABLE
Enable/disable the channel to detect motion.
SENSITIVITY
Set the sensitivity level. The sensitivity is from H (High), 9~ 2 and L (Low).
MASK SETUP
Select a specific area for motion recording. The DVR system will start
recording when the selected area has been detected motion.
STORAGE SETUP
To format hard disk and enable/disable hard disk spaces recycle.
HDD OVERWRITE
HDD SIZE
HDD USED
HDD FORMAT
VIDEO BACKUP
STORAGE SETUP
953 , 849MB
279MB 0%
32