Avermedia AVerDiGi EB3004 NET User Manual page 35

OSD MENU
MAIN MENU
CAMERA/RECORD
DISPLAY
SCHEDULE
EVENT SETUP
STORAGE
NETWORK
SYSTEM
MAIN MENU
CAMERA/RECORD
DISPLAY
SCHEDULE
EVENT SETUP
STORAGE
NETWORK
SYSTEM
Description
RECORD SCHEDULE
By default, in 24 hours, the recording schedule is set to always record every
hour. Refer to the table below to customize the recording condition.
Condition Description
NO RECORD Not recording at all.
ALWAYS Record non-stop.
Automatically switch to recorded at the frame rate of
FPS (alarm) that is setup in CAMERA CHANNEL
SETTING once an alarm is detected and if there is no
SMART
motion, it records at the frame rate of FPS that is setup
in CAMERA CHANNEL SETTING.
ALARM Start recording when the alarm is activated.
When each channel has different recording schedule,
the schedule table will display as Green color (VARIED
VARIED
RECORD).
CAMERA
Select a channel (1, 2, 3, or 4) or ALL for record schedule setup.
SET TO ALL
Select a recording condition – NO RECORD, ALAWAYS, SMART or
ALARM. Please refer to the above table for record condition description.
RECORD SCHEDULE
CAMERA ALL
SET TO ALL ALWAYS
00 02 04 06 08 10 12 14
SUN
MON
TUE
WED
THU
FRI
SAT
: SMART RECORD
: NO RECORDING
EVENT SETUP
Configure alarm, sensor, and motion.
EVENT SETUP
ALARM SETTING
SENSOR SETTING
MOTION DETECTION
30
16 18 20 22 24
: ALARM RECORD
: VARIED RECORD