Using The Dvr For The First Time - Avermedia AVerDiGi EB3004 NET User Manual

2.2

Using the DVR for the First Time

1. Make sure all devices and power cables are well connected.
2. Turn on the DVR unit by connecting the power cable into the power plug.
3. User should see the SYSTEM INITIALIZE window appear on the surveillance screen. The system
will do hard disk detection automatically.
4. For the first time use hard disk, please format the hard disk. Select HDD FORMAT and press
(YES) to format hard disk. If hard disk doesn't need to format, press
5. When is done, HDD FORMAT will show COMPLETE.
SYSTEM INITIALIZE
FW VERSION
HDD STATUS
HDD SIZE
HDD FORMAT
6. When hard disk format is done, please adjust the system date and time in order to have the correct
recording date and time.
7. Press to call up the OSD menu, and then, use
DATE/TIME and press
8. Press and use
9. And then, adjust the DATE and TIME by using
and to adjust the date and time.
10. When is done, the DVR system is ready to record.
B3. 01. 01. 00. 01
WAIT . . . .
476 , 918MB
YES(SELECT)/NO(MENU)
to make a selection.
and
DATE / TIME SETUP
DATE FORMAT
DATE
TIME
TIME SYNC
FORCE SYNC
TIME ZONE
LAST SYNC TIME
DAYLIGHT SAVING
START
END
OFFSET
SYSTEM INITIALIZE
FW VERSION
HDD STATUS
HDD SIZE
HDD FORMAT
and
to select the DATE FORMAT.
to make a selection and using
YYYY/MM/DD
2009 / 11 / 03
15 : 19 : 09
GMT +08 : 00
2009 / 01 / 01 00 : 00 : 00
2009 / 01 / 01 00 : 00 : 00
2009 / 01 / 01 00 : 00 : 00
00 : 00
16
(NO).
B3. 01. 01. 00. 01
WAIT . . . .
476 , 918MB
COMPLETE
to select SYSTEM →