Setup The Time Stamp - Avermedia AVerDiGi EB3004 NET User Manual

2.3.1

Setup the Time Stamp

By enabling TIME STAMP function, current date and time will be displayed on each channel screen to
verify the recording date and time. Please follow the below steps to enable TIME STAMP.
1. Press to call out OSD menu.
2. Using and
make a selection.
3. Select GENERAL and press
4. And then, select TIME STAMP by pressing
5. Using and
to confirm.
6. Press to exit from OSD menu.
7. The current date and time will display on upper right corner of each channel screen and will be
recorded.
to move the highlight to CAMERA/RECORD and press
to make a selection.
to select the disable/enable of TIME STAMP and press
GENERAL SETUP
RECORD MODE
DVR NAME
TIME STAMP
WATERMARK
AUTO RECORD
PRE RECORD
19
button.
CIF
COMPANY
00 SEC
to
or