Avermedia AVerDiGi EB3004 NET User Manual page 31

OSD MENU
CHANNEL SETTING SETUP
CH1
ENABLE
RECORD
AUDIO RECORD
PREVIEW
ENCRYPTION
MAX. FPS 30
FPS 30
QUALITY BEST BEST BEST BEST
FPS(ALARM) 30
QUALITY(ALARM) BEST BEST BEST BEST
120 / 120 FPS
Current total fps
Total fps value that
value that user
user can set
has set
CAMERA NAME SETUP
CH1 CAMERA1
CAMERA2
CH2
CAMERA3
CH3
CAMERA4
CH4
Description
CHANNEL SETTING
CH2 CH3 CH4
Configure the parameters of each channel.
ENABLE
Enable/disable the channel to display the video on the surveillance screen.
If the channel is disabled, there won't be any video display and recording.
30 30 30
30 30 30
RECORD
30 30 30
Enable/disable the channel number to record video.
i
AUDIO RECORD
Enable/disable audio recording. To record sound, make sure the audio input
device (ex: microphone) is connected to the DVR unit.
PREVIEW
Enable/disable the video preview on the surveillance screen.
MAX. FPS
Display the maximum frame rate of recording that user has set. Maximum
fps total value depends on the RESOLUTION that user has chosen.
FPS
Set the number of frames per second to be recorded. The higher the frame
rate, it uses more hard disk space.
QUALITY
Select the video quality setting from BEST, HIGH, GOOD, MEDIUM,
NORMAL or LOW. Choosing higher quality allows user to record less hours
but the quality of the recorded video is better.
FPS(ALARM)
Set the number of frames per second to be recorded when alarm has
occurred. The higher the frame rate, it uses more hard disk space.
QUALITY(ALARM)
Select the video quality (BEST, HIGH, GOOD, MEDIUM, NORMAL or LOW)
of alarm recording. Choosing higher quality allows user to record less hours
but the quality of the recorded video is better.
CHANNEL NAME
Give a name of the channel 1 ~ 4. Maximum is 12 characters and may
contain A~Z, 0~9, !, ", #, $, %, &, ', (, ), *, +, -, /, :, ;, <. >, ?, @, and space.
The channels are enabled in the ENABLE can be set for video
recording.
26