2.1.3
Controlling PTZ Camera
Using remote control, user can easily control PTZ camera at local site. Before starting, make sure the
PTZ camera is connected with the DVR unit and PTZ function is enabled(see also
Chapter
3.1).
2.1.3.1
To Enter the PTZ Mode
To control PTZ camera, user need to enter the PTZ mode first. Press
channel number button (
mode.
To exit PTZ mode, press
system will automatically exit PTZ mode.
2.1.3.2
To Set Preset Position
User can set 9 preset positions for PTZ camera. Using
1. Press
and camera channel number button (
2. Using
,
wants.
3. Press any number button over 3 seconds and the position will be saved.
4. To move the PTZ camera to preset position, just press the number button.
. The surveillance monitor will switch to single screen PTZ
)
button. Also, when the DVR system is idle over 1 minute, the DVR
,
and
to adjust the lens of the PTZ camera to the position that user
to
button to set the preset position.
)
14
PTZ Setup
button, and camera
Speed for PTZ
Camera
movement.
Using
adjust the speed.
to enter PTZ mode.
of
and
button to