Eaton Powerware 9355 Parallel User Manual page 37

5. On the bottom cover (and also the middle cover if 3-high), remove a
knockout tab in the top edge of the cover for each cable:
With wire cutters, cut either side of the tab and twist down to
remove the tab (see Figure 25).
6. Route the cable(s) to the approximate location of the cover access
holes.
®
EATON Powerware 9355 Parallel UPS (10/15 kVA) User's Guide
Figure 25. Removing Knockout Tabs
S
164201601 Rev A www.powerware.com
INSTALLING OPTIONS
31