Eaton Powerware 9355 Parallel User Manual page 18

UPS SETUP
NOTE Be sure to support the front and back of the cabinet when rolling it off the pallet to
prevent tipping.
7.
8.
9.
12
EATON Powerware
Slowly roll the cabinet toward the rear of the pallet. Once the pallet
tilts, continue rolling the cabinet down the pallet until the cabinet
touches the floor (see Figure 4).
If needed, adjust the leveling feet so that the cabinet will roll.
Figure 4. Unloading the Cabinet
With the cabinet supported, slowly pull the pallet away from the
cabinet (see Figure 5).
Figure 5. Removing the Pallet
Roll the cabinet to the desired location.
®
9355 Parallel UPS (10/15 kVA) User's Guide
S
164201601 Rev A www.powerware.com