Cleaning The Flatbed Glass And Document Cover Detector - Böwe Bell + Howell truper 3200 Operator's Manual

Cleaning the Flatbed Glass and Document Cover Detector

Preparation: Locate the blower accessory and remove the brush from the blower. Open a package of the
roller cleaning paper, as described in
Blower accessory
1
Press the power switch to the OFF position.
2
Raise the feeder tray in the direction of the arrow until the tray clicks into place.
3
Open the document cover in the direction of the arrow.
Feeder tray
"Roller Cleaning Paper" on page
Blower
Dotted line
Sensor or detector
www.bbhscanners.com
80.
Roller cleaning paper
Document cover
92 of 150