Functions And Settings; User Utility Main Dialog Window - Böwe Bell + Howell truper 3200 Operator's Manual

User Utility Main Dialog Window

This window displays the scanner status, scanner information and the User Utility functions and settings
options.
Scanner Status and Error Code Display
This section displays the status of the connected scanner along with error codes. For information about the
messages and error codes, see
Scanner Information
This section displays the following information:
• Model name and number
• Firmware Version
• Memory requirements
• Interface, one of the following:
STI USB (HS) = USB 2.0 Hi-Speed (default configuration)
STI USB (FS) = USB 1.1 Full Speed
ASPI SCSI = SCSI (Invalid configuration. No ASPI driver included.)
STI SCSI = SCSI (Using installed scanner driver.)
• Pre-Imprinter, enable or disable
"User Utility Error Codes" on page
www.bbhscanners.com

Functions and Settings

109.
101 of 150