Installing The Scanner; Quick Installation Checklist - Böwe Bell + Howell truper 3200 Operator's Manual

1
Read the Trūper Operator Manual located on the Trūper Installation Resource
CD-ROM.
Insert the CD-ROM into the appropriate drive on the computer. Microsoft Autoplay will start,
displaying the Select Your Language screen. Select your language and click OK. On the
CD-ROM main menu select View Manuals, then select View Trūper Manual.
If Autoplay is disabled, go to the Windows taskbar, select Start, Run and type
D:\SETUP.EXE, where "D" is the CD-ROM drive. Click OK. Select your language and click
OK. Then locate the manual, as described above.
2
Verify the computer system requirements.
Refer to "Computer System Requirements" on page
3
Attach the feeder tray to the scanner.
4
Connect the scanner.
Refer to "Initial Setup and Installation" on page
5
Install the software.
Refer to "Initial Setup and Installation" on page
Manual from the Trūper User Utility. Click the Trūper User Utility icon on your Windows
desktop, then click Help.
6
You are now ready to scan.
Refer to the instructions for your scanning or document management software application.

Installing the Scanner

Quick Installation Checklist

13.
28.
28. You can also access the Trūper Operator
www.bbhscanners.com
25 of 150