Böwe Bell + Howell truper 3200 Operator's Manual page 72

5
Close the document cover on top of the document.
• Gently close the document cover and do not slam the cover. If the document cover is
slammed, the document may move and may not be scanned properly.
• Do not open or press down on the document cover during scanning.
• Be sure to close the document cover before scanning and do not look directly at the scanner
light. You may damage your eyes.
Feeder tray
6
After scanning, open the document cover and remove the document.
7
Do the following to configure the driver:
• Open the Scanner Properties window.
• Select Flatbed from the Source drop-down list and click OK.
You are now ready to scan. Refer to the instructions for your scanning or document management
software application.
www.bbhscanners.com
Document cover
72 of 150