Cleaning The Paper Sensor, Waiting Sensors And Double Feed Detector - Böwe Bell + Howell truper 3200 Operator's Manual

Cleaning the Paper Sensor, Waiting Sensors and Double Feed Detector

Preparation: Locate the blower accessory and remove the brush from the blower.
1
Press the power switch to the OFF position.
2
Push the ADF door release button to open the ADF door.
3
Use the blower accessory to blow off any dirt from the surface of the paper sensor and waiting
sensor. Also, blow off any dirt from the surface of the metal reflector sheet used by the waiting
sensor.
Waiting sensor
Blower accessory
Blower
Sensor or detector
Reflector sheet for
waiting sensor
Paper sensor
www.bbhscanners.com
89 of 150