Cleaning Inside The Scanner - Böwe Bell + Howell truper 3200 Operator's Manual

If paper jamming, marking, or multiple-sheet feeding occurs frequently, clean the rollers, sensors and
double feed detector as described in this section. To maintain scanning quality, clean the scanner
components frequently: Clean inside the scanner at least once per week or after 20,000 sheets have been
scanned, whichever comes first.
To determine the number of sheets scanned, use the
page 100.)
The following guidelines are for cleaning inside the scanner:
• If the documents you scan are dirty, the scanner's parts and components will also become dirty.
Be sure the documents you scan are as clean as possible.
• When scanning with the flatbed, if black dots or white patches appear in the scanned results,
open the document cover and clean the flatbed glass and flatbed sheet using the roller cleaning
paper.
• If black or white lines appear on the scanned images, clean the ADF glass areas and the
reference plates as described in
Glass" on page
• Clean the flatbed glass and document cover detector as described in
Glass and Document Cover Detector" on page
• If paper jamming, marking, or double feeding occurs frequently even after cleaning, you may
need to change the rollers, as described in
Also observe the warnings for use of the roller cleaning paper shown in
page 80.
Note
For proper cleaning and maintenance, it is recommended that the following three roller cleaning
procedures be performed concurrently.
"Cleaning the Background Color Reference Plates and ADF
87.
www.bbhscanners.com

Cleaning Inside the Scanner

Trūper User Utility. (See
92.
"Replacing Consumables" on page
"Roller Cleaning Paper" on
"Trūper User Utility" on
"Cleaning the Flatbed
94.
79 of 150