Cleaning The Starting, Skew And Ending Sensors - Böwe Bell + Howell truper 3200 Operator's Manual

4
Use the blower accessory to blow off any dirt from the double feed detector (A) and double feed
detector (B).
Double feed detector (A)
5
Close the ADF door.
• When you close the ADF door, close it securely until the door is locked. Do not slam the ADF
door.

Cleaning the Starting, Skew and Ending Sensors

Preparation: Locate the blower accessory and remove the brush from the blower.
1
Press the power switch to the OFF position.
2
Pull the exit door release lever to open the exit door.
Double feed detector (B)
Blower accessory
Blower
Sensor or detector
www.bbhscanners.com
90 of 150