Tools, Tools Parameters; Ddns Group; Modem Group; Tools, Firmware Upgrade Parameters - Multitech MultiModem rCell User Manual

Intelligent wireless router

Hide thumbs Also See for MultiModem rCell:

Table of Contents

Chapter 3 – Using the Web Management Software

Port:

Sets the server port. The default is None

Connection Terminate By:

Escape Sequence:

Set the escape sequence characters at which the connection terminates.

Inactivity timeout:

Others:

The other terminating sequences are: DTR-toggle or Always-On.

DTR-toggle:

If DTR status goes low, the connection terminates.

Always-On:

Sets the terminate sequence as Always-on.

Submit Button:

Click Submit to save these settings.

Tools, Tools Parameters

DDNS Force Update:

Click Update to update the DDNS server with your current dynamically assigned IP address.

DDNS Status:

Click Refresh to display the DDNS Status after a forced update.

Reset Modem:

Click Reset to reset the integrated cellular modem.

MultiModem rCell User Guide

Sets the connection's terminate sequence as follows:

Set the inactivity timeout at which the connection terminates.

Table of Contents

Do you have a question about the MultiModem rCell and is the answer not in the manual?