1. Manuals
  2. Brands
  3. Multitech Manuals
  4. Wireless Router
  5. MultiModem rCell MTCBA-H-EN2
  6. User manual

Multitech MultiModem rCell MTCBA-H-EN2 User Manual

Intelligent wireless router
Hide thumbs Also See for MultiModem rCell MTCBA-H-EN2:
Table of Contents

Advertisement

Quick Links

Download this manual
MultiModem
rCell
®
Intelligent Wireless Router

User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultiModem rCell MTCBA-H-EN2 and is the answer not in the manual?

Questions and answers

Related Manuals for Multitech MultiModem rCell MTCBA-H-EN2

Summary of Contents for Multitech MultiModem rCell MTCBA-H-EN2

  • Page 1: User Guide

    MultiModem rCell ® Intelligent Wireless Router User Guide...

  • Page 2: Technical Support

    Multi-Tech products directly to our technical support team. Get answers to your most complex questions, ranging from implementation, troubleshooting, product configuration, firmware upgrades and much more. To create an account and submit a Support Case on the Portal, visit https://support.multitech.com. Knowledge Base and Support Services: www.multitech.com/support.go The Knowledge Base provides immediate answers to your questions and gives you access to support resolutions for all Multi- Tech products.

  • Page 3: Table Of Contents

    Table of Contents Table of Contents CHAPTER 1 – INTRODUCTION AND PRODUCT DESCRIPTION ................. 5 M ultiModem MTCBA-H-EN2 (HSDPA) ............................5 MultiModem MTCBA-G2-EN2 ..............................5 MultiModem MTCBA-E1-EN2 (EDGE) ............................5 MultiModem MTCBA-C1-EN2 CDMA 1xRTT ..........................6 Safety Warnings ...................................6 Ethernet Ports Caution .................................6 H andling Precautions ..................................6 1 2 B 1 2 B Vehicle Safety ....................................6...
  • Page 4 Table of Contents CDMA Antenna Requirements/Specifications ......................... 61 PTCRB Requirements for the Antenna ........................... 61 GSM/EGSM RF Specifications ............................61 GSM Antenna Requirements/Specifications ........................62 HSDPA / UMTS RF Specifications ..........................62 HSDPA / UMTS Antenna Requirements/Specifications ....................62 GPS (Global Positioning) RF Specifications ........................62 GPS Antenna Requirements/Specifications ........................

  • Page 5: Chapter 1 - Introduction And Product Description

    M ultiModem MTCBA-H-EN2 (HSDPA) The MultiModem MTCBA-H-EN2 wireless router delivers some of the fastest cellular data speeds by utilizing HSDPA technology. It allows users to connect to the Internet and send and receive data faster than possible with an ordinary GSM/GPRS network making it ideal for highly data-intensive applications.

  • Page 6: Multimodem Mtcba-C1-En2 Cdma 1Xrtt

    Chapter 1 – Product Description and Specifications AT Commands: The MultiModem MTCBA-E1-EN2 wireless router is configured using the EDGE AT Commands. These commands are documented in the Reference Guide for the MultiModem Wireless EDGE Modems, document number S000371x. MultiModem MTCBA-C1-EN2 CDMA 1xRTT The MultiModem MTCBA-C1-EN2 wireless router offers standards-based dual band CDMA 1xRTT performance via the integrated cellular modem.

  • Page 7: Front Panel

    Speed. Lit when the Ethernet is linked at 100 Mbps. If it is not lit, the Ethernet is linked at 10 Mbps. Carrier Detect. Lit when data connection has been established. Line Status Dependent on Model MTCBA-H-EN2 MTCBA-G2-EN2 MTCBA-E1-EN2 MTCBA-C1-EN2 Continuous “on”...

  • Page 8: Specification

    Chapter 1 – Product Description and Specifications Specification Features MTCBA-H-EN2 MTCBA-E1-EN2 MTCBA-G2-EN2 MTCBA-C1-EN2 Performance HSDPA/UMTS EDGE: E-GPRS Class 10, GPRS Class 10 CDMA2000 1xRTT EDGE: Class 10 GPRS: Class 12 GPRS; Class 10 Band, Frequency Quad-band Quad-band Quad-band GSM/GPRS Dual-band 800/1900 MHz...

  • Page 9: Power

    Chapter 1 – Product Description and Specifications Power MTCBA-H-EN2 MTCBA-G2-EN2 MTCBA-E1-EN2 MTCBA-C1-EN2 Sleep: 0.180A, 1.665W @ 9V, Sleep: 0.163A, 1.5W @ 9V, Sleep: 0.175A,1.6W @ 9V, Sleep: 0.186A,1.7W @ 9V, 0.092A, 1.84W @ 20V, 0.082A, 1.6W @ 20V, 0.090A, 1.8W @ 20V, 0.091A, 1.8W @ 20V,...

  • Page 10: C Hapter 2 - Activation And Installation

    Chapter 2 – Activation and Installation C hapter 2 – Activation and Installation Account Activation for Wireless Devices Please refer to the wireless account Activation Notice included with your unit and located on the MultiModem CD. Follow the directions on the Activation Notice to activate your account. Note: If you need remote access to your MultiModem over the Internet for remote configuration, you need to ensure that your wireless network provider has provisioned mobile terminated data and fixed or dynamic public IP address in...

  • Page 11: M Aking The Connection

    Chapter 2 – Activation and Installation M aking the Connection 2 2 B 2 2 B Connect a suitable antenna to the SMA connector (see antenna specifications in Appendix B). Using an Ethernet cable, connect one end of the cable to the ETHERNET connector on the back of the router and the other end to your pc either directly or via a switch or hub.

  • Page 12: O Ptional - Attach The Router To A Flat Surface

    Chapter 2 – Activation and Installation O ptional – Attach the Router to a Flat Surface 2 3 B 2 3 B Before you mount your router to a permanent surface, verify signal strength, refer to Verify Signal Strength in this Chapter. The router can be panel mounted with screws spaced according to the measurement shown.

  • Page 13: S Et Your Pc's Tcp/Ip Address For Ethernet Functionality

    Chapter 2 – Activation and Installation S et Your PC’s TCP/IP Address for Ethernet Functionality 2 4 B 2 4 B The following directions establish a TCP/IP connection at the pc so the PC can communicate with the router. The following directions were written using a Windows XP/ 2003+ operating system.
  • Page 14 Chapter 2 – Activation and Installation The Internet Protocol (TCP/IP) Properties screen. Important Note: If this screen opens and displays your current IP configuration, we suggest you record this information for future reference (i.e., after the router is configured, you may wish to return this PC to its original settings). ●...

  • Page 15: A T Command For Verifying Signal Strength

    Chapter 2 – Activation and Installation A T Command for Verifying Signal Strength 2 5 B 2 5 B To communicate directly with the cellular modem to verify signal strength, network registration, and roaming status, telnet to the modem. Note: Ensure that the Status LED is blinking, indicating that the router is ready.

  • Page 16: C Onfigure The Ethernet Interface Using The Web Management Software

    Chapter 2 – Activation and Installation C onfigure the Ethernet Interface Using the Web Management 2 7 B 2 7 B Software You are now ready to configure the Ethernet interface. This is accomplished by using the router's factory-installed Web Management software.
  • Page 17 Chapter 2 – Activation and Installation After clicking the Wizard Setup selection, the Wizard Setup screen displays. W izard Setup 7 7 B 1 0 4 B A minimum router configuration is provided using the Wizard Setup. This provides a quick way to enter and save information needed to create a connection to the Internet.

  • Page 18: S Hutdown Caution

    Chapter 2 – Activation and Installation A Note About the Access Point Name The APN (Access Point Name) is assigned by your wireless service provider, but you may have to ask for it. An access point is an IP network to which a MultiModem rCell Router connects. The Web Management software asks for the APN on the Wizard Setup screen and the PPP screen.

  • Page 19: C Hapter 3 - Using The Web Management Software

    Chapter 3 – Using the Web Management Software C hapter 3 – Using the Web Management Software The Web Management software configures the Ethernet functionality of your router. N avigating the Web Management Software 2 9 B 2 9 B This section explains the menu structure and the navigation buttons of the router’s Web Management software.
  • Page 20 Chapter 3 – Using the Web Management Software Screen Parts Menu Bar Submenu Title Submenu List Screen Buttons Screen Name Screen Input Area S creen Buttons 1 1 0 B Home: Click this button to return to the Home screen. Wizard Setup: Click this button to display the Wizard Setup screen on which you can quickly set up your MultiModem rCell Router with basic configuration settings.

  • Page 21: Web Management Software Screens

    Chapter 3 – Using the Web Management Software Web Management Software Screens The rest of this chapter describes each of the Web Management software screens. IP Setup I P Setup > General Configuration 7 8 B In the General Configuration, you will set the general system-based parameters. Multi-Tech Systems, Inc.

  • Page 22: General Configuration

    Chapter 3 – Using the Web Management Software General Configuration Date and Time: The system date and time display in these formats: MM/DD/YYYY / HH:MM:SS. A real time clock is part of SNTP to display proper time. IP Configuration Enter the following addresses for the Ethernet interface. IP Address (Default = 192.168.2.1), Mask (Default 255.255.255.0), Default Gateway (Default 0.0.0.0), Primary DNS (Default 0.0.0.0), Secondary DNS (Default 0.0.0.0).
  • Page 23 Chapter 3 – Using the Web Management Software I P Setup > HTTP Configuration 7 9 B HTTP Configuration HTTP Port: Enter the port number on which the HTTP server will listen for requests. Default is 80. HTTP Time-0ut: Set the HTTP session in seconds. The default is 120 seconds. Authentication Username: Enter the Username that can access to the Web Management software.
  • Page 24 Chapter 3 – Using the Web Management Software I P Setup > DDNS Configuration 8 0 B DDNS (Dynamic Domain Naming System) allows you to have a static domain name with a dynamic IP address. Whenever your dynamic IP address changes, it is submitted to the DDNS server where your domain name is updated to point to the new IP address.
  • Page 25 Chapter 3 – Using the Web Management Software I P Setup > SNTP Configuration 8 1 B General Configuration SNTP Client: Enable or disable the SNTP Client to contact the configured server on the UDP port 123 and set the local time.
  • Page 26 Chapter 3 – Using the Web Management Software Daylight Saving End Time End Ordinal: Set the end ordinal to use during Daylight Saving mode. Select the week in which daylight saving time ends. Options are first/second/third/fourth/last. Default is last. End Month: Set the end month to use during Daylight Saving mode.

  • Page 27: Ppp

    Chapter 3 – Using the Web Management Software P PP > PPP Configuration 8 4 B NAT Configuration Enable/disable NAT (Network Address Translation). The default is Enable. If NAT is enabled: ● Your LAN can use one set of IP addresses for internal traffic and a second set of addresses for external traffic.

  • Page 28: Icmp Keep Alive Check

    Note: The MTCBA-H-EN2 is shipped with command AT^SLED=1 entered at Init String 2. If the MTCBA-H-EN2 is set back to factory default using the pushbutton on the back of the chassis, this command will need to be reentered and saved as Init String 2 for the LS LED to display properly.
  • Page 29 Chapter 3 – Using the Web Management Software PPP > Wakeup-on-Call The Wakeup-on-Call feature allows the router to wake up and initiate a connection when there is an incoming call or LAN activity. If you desired some security with this feature, you can set up the router to wake up based on Caller ID or SMS instead of allowing all incoming calls to wakeup the router.
  • Page 30 Chapter 3 – Using the Web Management Software PPP > Wakeup-On-Call Examples E xample 1 – Set Up the Ethernet Router to Activate on Incoming SMS Message 1 1 2 B U On the PPP > PPP Configuration screen, set up the following parameters: PPP General ●...
  • Page 31 Chapter 3 – Using the Web Management Software Example 3 – Set Up the Ethernet Router to Activate on ALL Incoming Calls On the PPP >PPP Configuration screen, set up the following parameters: PPP General ● Make sure that PPP is Enabled. ●...
  • Page 32 Chapter 3 – Using the Web Management Software PPP > Power-On Configuration The Power-On Configuration feature allows you to set an initialization string that will be sent to the router upon boot up. Power-On Init String Configuration Power-On Init String: You can enter a string of 0 to 40 characters that will be sent to the router upon boot up.

  • Page 33: N Etworks & Services

    Chapter 3 – Using the Web Management Software N etworks & Services 3 3 B N etworks & Services > Network Configuration 8 7 B Networks or Hosts can be added here. The options to Delete or Edit a network after it has been defined and added are available by using the table at the bottom of the screen.
  • Page 34 Chapter 3 – Using the Web Management Software N etworks & Services > Service Configuration 8 8 B On this screen you can specify the standard set of well known services available on the system. These services enable the configuration of the user-defined services. The options to Delete or Edit a service after it has been defined and added are available by using the table at the bottom of the screen.

  • Page 35: Packet Filter

    Chapter 3 – Using the Web Management Software P acket Filters > Packet Filters 8 9 B You can Delete or Edit a packet filter rule after it has been defined and added by using the table at the bottom of the screen. Packet Filter From (Host/Networks): Enter the network/host from which the packet must originate for the filter rule to match.
  • Page 36 Chapter 3 – Using the Web Management Software 6 1 B P acket Filters > DNAT Configuration 9 0 B Destination Network Address Translation (DNAT) is a process that allows the placing of servers within the protected network and making them available for a certain service to the outside world. The DNAT process running on the router translates the destination address of incoming packets to the address of the real network server on the LAN.
  • Page 37 Chapter 3 – Using the Web Management Software On the Packet Filters > DNAT Configuration screen, define the DNAT rule. Allow Access – Select the original target network/host of the IP packets that you now want rerouted. The original target network/host is the one previously defined in the Network Configuration section. Example: External Service –...
  • Page 38 Chapter 3 – Using the Web Management Software 6 3 B P acket Filters > Advanced 9 2 B Connection Tracking H323: Enable/disable the forwarding of H323 packets across the firewall. PPTP: Enable/disable PPTP Packet Pass-through (PPTP NAT support). ICMP Configuration The Internet Control Message Protocol (ICMP) is used to test the network connections and the functionality of the firewall and is also used for diagnostic purposes.

  • Page 39: Gre Tunnels

    Chapter 3 – Using the Web Management Software GRE Tunnels GRE tunneling and GRE routing together are referred to Generic Routing Encapsulation (GRE). GRE Routing is an integral part of GRE tunneling. First, the GRE Tunnels are created using the GRE Tunnel Configuration. Then the routes for the remote networks that are to be routed through a tunnel need to be specified in the GRE Routes Configuration.
  • Page 40 Chapter 3 – Using the Web Management Software 6 5 B G RE Tunnels > GRE Routes Configuration 9 4 B GRE Routes Configuration Remote Network: Select the remote network for which the traffic destined to it must be routed through the given tunnel.

  • Page 41: Dhcp Server

    Chapter 3 – Using the Web Management Software DHCP Server 6 6 B D HCP Server > Subnet Settings 9 5 B General Configuration DHCP (Dynamic Host Configuration Protocol) is a protocol that allows individual devices on an IP network to get their own network configuration information (IP address, subnet mask, broadcast address, etc.) from a DHCP server.
  • Page 42 Chapter 3 – Using the Web Management Software 6 7 B D HCP Server > Fixed Addresses 9 6 B DHCP Fixed Configuration The DHCP server can be made to assign a fixed IP address for a particular user by identifying the MAC address. This binding can be made permanent by configuring it here.

  • Page 43: Ipsec

    Chapter 3 – Using the Web Management Software IPSec The IPSec (IP Security) protocol suite, based on modern cryptographic technologies, provides security services like encryption and authentication at the IP network layer. It secures the whole network traffic providing guaranteed security for any application using the network.

  • Page 44: A Dd Ike Connection

    Chapter 3 – Using the Web Management Software A dd IKE Connection 4 7 B Add an IKE Connection Connection Name Enter a text name that will identify the connection for you. Compression Check the compression checkbox to enable IPCOMP, the compression algorithm.
  • Page 45 Chapter 3 – Using the Web Management Software Remote Gateway IP Interface where the IPSec tunnel ends. In the case of a Road Warrior with a Dynamic IP address, this should be configured to ANY. FQDN FQDN is a DNS resolvable fully qualified domain name with which identity the right peer can be identified.

  • Page 46: 1 B A Dd Manual Connection

    Chapter 3 – Using the Web Management Software 7 1 B A dd Manual Connection 4 8 B 7 2 B A dd Manual Connection 4 9 B Connection Name Enter a text name that will identify the connection for you. Compression Check the compression checkbox to enable IPCOMP, the compression algorithm.
  • Page 47 Chapter 3 – Using the Web Management Software is a number needed by the manual keying code. Enter any 3-digit hexadecimal number, which is unique for a security association. It should be in the form 0xhex (0x100 through 0xfff is recommended). If you have more than one manual connection, then the SPI Base must be different for each one.

  • Page 48: S Erial-Port

    Chapter 3 – Using the Web Management Software S erial-Port 3 7 B 3 8 B S erial-Port > Serial Port Settings 3 8 B Serial-Port Configuration Serial-Port Configuration allows for the configuration of the serial terminal connected to the RS-232 connector DE9 on the back of the unit.
  • Page 49 Chapter 3 – Using the Web Management Software S erial Port > Client Settings 9 8 B The TCP/UDP client feature enables the router to act as a proxy TCP/UDP client to the serial terminal connected to the DE9, RS232 port on the router thus facilitating the serial terminal to access any TCP/UDP server on the LAN/WAN. Once the session, serial terminal to TCP/UDP server, is opened successfully, it allows two-way traffic between the serial device and the remote server.
  • Page 50 Chapter 3 – Using the Web Management Software Serial Port > Server Settings This feature enables a TCP/UDP client on the Ethernet network to connect to the remote serial terminal connected to the DE9, RS232 port on the router. The router acts as a TCP/UDP server which allows two way traffic between the TCP/UDP client and the remote terminal on the serial port.

  • Page 51: T Ools

    Chapter 3 – Using the Web Management Software T ools 3 9 B T ools > Tools 6 9 B DDNS DDNS Force Update: Click the Update button to update the DDNS server with your current dynamically assigned IP address. DDNS Status: Click the Refresh button to display the DDNS Status after a forced update.

  • Page 52: T Ools > Save Configuration

    Chapter 3 – Using the Web Management Software T ools > Load Configuration 7 1 B Load Configuration Browse File for Load Configuration: Click the Browse button to open the file that allows you to locate the configuration file. When found, highlight the file name and press Enter so that the file name displays in the text box. Then click the Load button.

  • Page 53: S Tatistics & Logs

    Chapter 3 – Using the Web Management Software S tatistics & Logs 4 0 B 4 0 B 8 0 B S tatistics & Logs > System Information 5 2 B This is an example of the Statistics & Logs System Information Multi-Tech Systems, Inc.

  • Page 54: 1 B S Tatistics & Logs > Ethernet

    Chapter 3 – Using the Web Management Software 8 1 B S tatistics & Logs > Ethernet 5 3 B This is an example of the Ethernet Statistics & Logs screen. It shows Ethernet statistics. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 55: 2 B S Tatistics & Logs > Ppp

    Chapter 3 – Using the Web Management Software 8 2 B S tatistics & Logs > PPP 5 4 B This is an example of the PPP Statistics & Logs screen. It shows PPP statistics when PPP is enabled. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 56: 3 B S Tatistics & Logs > Ppp Trace

    Chapter 3 – Using the Web Management Software 8 3 B S tatistics & Logs > PPP Trace 5 5 B This is an example of the PPP Trace Statistics & Logs screen. It shows the PPP trace messages. Statistics & Logs > DHCP Statistics This is an example of the DHCP Statistics &...

  • Page 57: 6 B S Tatistics & Logs > Modem Information

    Chapter 3 – Using the Web Management Software 8 6 B S tatistics & Logs > Modem Information 5 7 B This screen displays the modem commands set on the PPP > Modem Commands screen and also displays the results of the commands.

  • Page 58: 0 B S Tatistics & Logs > Ipsec Live Log

    Chapter 3 – Using the Web Management Software 9 0 B S tatistics & Logs > IPSec Live Log 6 1 B This screen displays the IPSec Live Log. 9 1 B S tatistics & Logs > IPSec Log Traces 6 2 B This screen displays the IPSec Log Traces.

  • Page 59: A Ppendix A - A Reference Table Of Commonly Supported Subnets

    Appendix A – Commonly Supported Subnets A ppendix A – A Reference Table of Commonly Supported Subnets This table lists commonly supported Subnets organized by Address. Network Number Hosts Available Broadcast Address 255.255.255.128 N.N.N.0 N.N.N.1-126 N.N.N.127 N.N.N.128 N.N.N.129-254 N.N.N.255 Network Number Hosts Available Broadcast Address 255.255.255.192...
  • Page 60 Appendix A – Commonly Supported Subnets Network Number Hosts Available Broadcast Address N.N.N.232 N.N.N.233-238 N.N.N.239 N.N.N.240 N.N.N.241-246 N.N.N.247 N.N.N.248 N.N.N.249-254 N.N.N.255 Network Number Hosts Available Broadcast Address 255.255.255.252 N.N.N.0 N.N.N.1-2 N.N.N.3 N.N.N.4 N.N.N.5-6 N.N.N.7 N.N.N.8 N.N.N.9-10 N.N.N.11 N.N.N.12 N.N.N.13-14 N.N.N.15 N.N.N.16 N.N.N.17-18 N.N.N.19...

  • Page 61: Cellular Information

    Appendix B – Cellular Information A ppendix B - Cellular Information Antenna System for Cellular Devices The cellular/wireless performance is completely dependent on the implementation and antenna design. The integration of the antenna system into the product is a critical part of the design process; therefore, it is essential to consider it early so the performance is not compromised.

  • Page 62: Gsm Antenna Requirements/Specifications

    Appendix B – Cellular Information GSM Antenna Requirements/Specifications Frequency Range 824 – 960 MHz / 1710 – 1990 MHz Impedance 50 Ohms VSWR VSWR shall not exceed 2.0:1 at any point across the bands of operation Typical Radiated Gain 3 dBi on azimuth plane Radiation Omni-directional Polarization...
  • Page 63 Appendix B – Cellular Information Antennas Available from Multi-Tech Systems, Inc. Quad Band Description Part Number Hinged Right Angle 800/900/1800/1900 MHz Cellular Modem Antenna ANQB-1HRA Hinged Right Angle 800/900/1800/1900 MHz Cellular Modem Antenna ANQB-10HRA Hinged Right Angle 800/900/1800/1900 MHz Cellular Modem Antenna ANQB-50HRA Dual Band Description Part Number...

  • Page 64: A Ppendix C - Regulatory Compliance

    Appendix C – Regulatory Compliance A ppendix C – Regulatory Compliance 9 2 B E MC, Safety, and R&TTE Directive Compliance 6 3 B The CE mark is affixed to this product to confirm compliance with the following European Community Directives: Council Directive 2004/108/EC of 15 December 2004 on the approximation of the laws of Member States relating to electromagnetic compatibility;...

  • Page 65: A Ppendix D - Waste Electrical And Electronic Equipment

    Appendix C – Regulatory Compliance A ppendix D – Waste Electrical and Electronic Equipment July, 2005 W aste Electrical and Electronic Equipment (WEEE) 1 1 7 B The WEEE directive places an obligation on EU-based manufacturers, distributors, retailers and importers to take-back electronics products at the end of their useful life.

  • Page 66: A Ppendix E - Environmental Information

    Appendix E – Environmental Information A ppendix E – Environmental Information Restriction of the Use of Hazardous Substances (RoHS) Multi-Tech Systems, Inc. Certificate of Compliance 2002/95/EC Multi-Tech Systems, Inc. confirms that this product now complies with the chemical concentration limitations set forth in the directive 2002/95/EC of the European Parliament (Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment - RoHS) These Multi-Tech Systems, Inc.
  • Page 67 Appendix E – Environmental Information 依照中国标准的有毒有害物质信息 根据中华人民共和国信息产业部 (MII) 制定的电子信息产品 (EIP) 标准－中华人民共和国《电子信息产品污染控制管理办法》（第 39 号），也称作中国 RoHS，下表列出了 Multi-Tech Systems Inc. 产品中可能含有的有毒物质 (TS) 或有害物质 (HS) 的名称及含量水平方面的信息。 有害/有毒物质/元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 成分名称 (PB) (Hg) (CR6+) (PBDE) (CD) (PBB) 印刷电路板 电阻器 电容器 铁氧体磁环 继电器/光学部件...

  • Page 68: Reach Statement

    Appendix E – Environmental Information REACH Statement Registration of Substances: After careful review of the legislation and specifically the definition of an “article” as defined in EC Regulation 1907/2006, Title II, Chapter 1, Article 7.1(a)(b), it is our current view Multi-Tech Systems, Inc. products would be considered as “articles”. In light of the definition in §...

  • Page 69: Index

    Index Index Access Point Name ..............20 H323 packets connection tracking ..........40 AH Key ..................48 Handling Precautions ..............6 Authentication Algorithms ............48 HSDPA/UMTS Antenna Specifications ........64 Auto Dialout configuration ............24 HSDPA/UMTS RF Specifications ..........64 Autodiscovery configuration ............
  • Page 70 Index Server Port ................. 24 Service Configuration ..............36 Time zone configuration ............27 Shutdown caution ..............20 Tools ................... 53 SNTP configuration ..............27 Specifications ................9 Static Routes configuration ............28 .................... 36 Statistics & Logs > DHCP Statistics ..........

This manual is also suitable for:

Multimodem rcell mtcba-g2-en2Multimodem rcell mtcba-e1-en2Multimodem rcell mtcba-c1-en2

Table of Contents