Optional - Attaching The Router To A Flat Surface; Setting Tcp/Ip Address - Multitech MultiModem rCell User Manual
Intelligent wireless router
Hide thumbs
Also See for MultiModem rCell:
- User manual (79 pages) ,
- Quick start manual (16 pages) ,
- User manual (91 pages)
Table of Contents
Advertisement
Optional – Attaching the Router to a Flat Surface
Before you mount your router to a permanent surface, verify signal strength. For more information, refer to Verify
Signal Strength in this chapter.
The router can be panel mounted with screws spaced according to the measurement shown.
Note:
Use either #6 or #8 pan head screws for all four mount locations.
Setting TCP/IP Address
This section describes how to configure a TCP/IP address so the computer can communicate with the router.
From the Start menu, select Control Panel. In the window that opens, double-click Network Connections. The
1.
Network Connections window opens.
28
Chapter 2 – Installing the Router
MultiModem rCell User Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiModem rCell and is the answer not in the manual?