Multitech MultiModem rCell User Manual page 63

Chapter 3 – Using the Web Management Software
Action: Enter the action that the packet filter executes if the rule matches any traffic traversing the firewall. Types
of actions defined are:
●
Accept: Allows/accepts all packets that match this rule.
●
Reject: Blocks all packets that match this rule. The host sending the packet is informed that the packet has
been rejected.
●
Drop: Blocks all packets that match this rule, but the host is not informed; that is, this is a silent drop.
●
Log: Packets matching the rule; that is, the corresponding source address, destination address, and service are
logged.
Add Button: Click the Add button. The defined packet filter rule is added and appears at the bottom of the screen.
MultiModem rCell User Guide 63