Submitting And Saving Your Changes - Multitech MultiModem rCell User Manual

Intelligent wireless router

Hide thumbs Also See for MultiModem rCell:

Table of Contents

Chapter 3 – Using the Web Management Software

Dial Prefix:

Set the modem dial prefix. The default is ATDT.

Connect String:

Set the modem Connect String. The default is CONNECT.

APN:

Enter the APN (Access Point Name). The APN is assigned by your wireless service provider.

Init String 1-4:

Configure the modem init strings. You can set up to 4 modem initialization strings.

Baud Rate:

The Baud Rate option is only displayed on certain models and is set at 230.4K, by default. The default

setting is set for maximum performance. Setting the baud rate higher, particularly on the G2 models, is not

recommended as it may adversely affect the performance.

Submitting and Saving Your Changes

To save these settings, click Submit.

To ensure your changes go into effect, click Save and Restart.

MultiModem rCell User Guide

Table of Contents

Do you have a question about the MultiModem rCell and is the answer not in the manual?