1. Manuals
  2. Brands
  3. Multitech Manuals
  4. Wireless Router
  5. MultiModem rCell
  6. User manual

Multitech MultiModem rCell User Manual

Intelligent wireless router
Hide thumbs Also See for MultiModem rCell:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
MultiModem
rCell
®
Intelligent Wireless Router

User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultiModem rCell and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Multitech MultiModem rCell

Summary of Contents for Multitech MultiModem rCell

  • Page 1: User Guide

    MultiModem rCell ® Intelligent Wireless Router User Guide...

  • Page 2: Technical Support

    Description 7 4 B 9 8 B 08/31/10 Initial release of MultiModem rCell with GPS and without GPS for C1,E1,G2,H4, and EV2 models. 10/25/10 Added Sprint and Verizon Activation into a new Carrier Activation chapter (Chapter 3) and restructure installation.

  • Page 3: Table Of Contents

    5 2 B 8 0 B S tatistics & Logs > System Information ......................60 5 3 B 8 1 B S tatistics & Logs > Ethernet .......................... 61 5 4 B 8 2 B S tatistics & Logs > PPP ..........................62 Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 4 A PPENDIX E – ENVIRONMENTAL INFORMATION ............73 Restriction of the Use of Hazardous Substances (RoHS) .................. 73 China ROHS ............................... 74 REACH Statement .............................. 75 APPENDIX F – SPRINT ACTIVATION FAILURE CORRECTIVE ACTION ....76 INDEX ..............................78 Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 5: Chapter 1 - Introduction And Product Description

    Tri-band UMTS/HSPA 7.2 performance Without GPS Option MTCBA-H4-EN2-GP Tri-band UMTS/HSPA 7.2 performance With GPS Option MTCBA-EV2-EN2 Dual-band 800/1900 MHz EV-DO Rev A performance Without GPS Option MTCBA-EV2-EN2-GP Dual-band 800/1900 MHz EV-DO Rev A performance With GPS Option Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 6: Related Documentation

    Commands. These commands are documented in the Reference Guide number S000483x. MultiModem MTCBA-EV2-EN2 (EV-DO) AT Commands: The MultiModem MTCBA-EV2-EN2 wireless router is configured using the EV-DO AT Commands. These commands are documented in the Reference Guide number S000482x. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 7: Safety Warnings

    Provision 188 of the UN Model Regulations, Special Provision A45 of the ICAO-TI/IATA-DGR (Air), Special Provision 310 of the IMDG Code, and Special Provision 188 of the ADR and RID (Road and Rail Europe). Warning! There is danger of explosion if the battery is incorrectly replaced! Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 8: Front Panel

    1 Bar, 2 Bar, and 3 Bar “ON” – Good signal (24 <= RSSI > = 31) * To be accurate, the AT^SSYNC command must be set to 1 so that the factory default LED timings are used. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 9: Package Contents

    1 power supply AC or DC power supply, and an antenna. 1 Quick Start Guide 1 MultiModem CD Note: You must supply mounting screws. Note: Your wireless provider will supply the SIM card. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 10: Specifications

    “UL has evaluated this device for use in ordinary locations only. Installation in a vehicle or other outdoor locations has not been evaluated by UL. UL Certification does not apply or extend to use in vehicles or outdoor applications or in ambient above 40° C.” Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 11: Power

    1850 to 1910 MHz 824 to 849 MHz 1850 to 1910 MHz RF Power Stand 2W at 12.5% duty cycle 2W at 12.5% duty cycle 1W at 12.5% duty cycle 1W at 12.5% duty cycle Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 12: Global Positioning System (Gps)

    Pin 3 TX Pin 4 DTR Pin 5 GND Pin 6 DSR* Pin 7 RTS Pin 8 CTS Pin 9 RI Note: The DSR signal on pin 6 is always asserted by the router. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 13: Chapter 2 - Installation

    Depending on the power source, connect either the power supply module with the appropriate blade or the optional DC power cable. If you are using the power supply module, remove the protective shipping cover. Attach the appropriate interchangeable blade piece to the power supply module. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 14 (Wait for this response from the modem) Router is now ready to be powered off or reset. If you do not see the +WIND:10 response, you may need to activate the unsolicited message by using the command AT+WUSLMSK=00020000,0 Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 15: Optional - Attach The Router To A Flat Surface

    Before you mount your router to a permanent surface, verify signal strength, refer to Verify Signal Strength in Chapter 3. The router can be panel mounted with screws spaced according to the measurement shown. Note: Use either #6 or #8 pan head screws for all four mount locations. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 16: S Et Your Pc's Tcp/Ip Address For Ethernet Functionality

    The Network Connections screen displays. Right-click the Local Area Connection icon and choose Properties from the drop down list. The Local Area Connection Properties dialog box displays. ● Select Internet Protocol [TCP/IP]. ● Click the Properties button. The Internet Protocol (TCP/IP) Properties screen displays. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 17 Enter the IP Address for the Preferred DNS Server. Example: 205.171.3.65 ● Click OK. ● Close the Local Area Properties screen by clicking OK. ● Close the Control Panel. ● Repeat these steps for each PC on your network. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 18: Configure Ethernet Interface Using Web Management Software

    Additional features and functions can be set up using the complete Web Management software program, described in Chapter 3. ● Provides a short way to enter and save information needed to create a connection to the Internet. Select Wizard Setup Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 19: Wizard Setup

    PAP, CHAP, or PAP-CHAP. Default = PAP-CHAP Username Enter the PPP Username. This name authenticates the remote peer. Password Enter the PPP Password. This password authenticates the remote peer. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 20 The APN (Access Point Name) is assigned by your wireless service provider, but you may have to ask for it. An access point is an IP network to which a MultiModem rCell Router connects. The Web Management software asks for the APN on the Wizard Setup screen and the PPP screen.

  • Page 21: Chapter 3 - Carrier Activation

    Checking Network Registration and Roaming Status In this procedure, you will verify that the MultiModem rCell Router has been registered on the wireless network. Using HyperTerminal, type AT+CREG? for most models. The MTCBA-EV2-EN2 does not support this command, see the Note below for an alternative method.

  • Page 22: Verizon Wireless Networks Activation

    After the last AT Command is entered, press: CTRL + ] (the right bracket). The following prompt displays: telnet> Type quit and press Enter. Then the following prompt displays: c:> Type exit and press Enter. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 23: Chapter - 4 Using The Web Management Software

    Then you must click the Save & Restart button, located on the Menu bar, in order for your settings to take effect. Save & Restart does not have to be executed after each screen; you can change and Submit several screens, and then click Save & Restart. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 24 Firmware Upgrade Ethernet Server Settings Load Configuration Save PPP Trace Configuration DHCP Statistics GRE Statistics Modem Info Service Status TCP/UDP Client Live Log TCP/UDP Server Live Log IPSec Live Log IPSec Log Traces Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 25: Web Management Software Screens

    The rest of this chapter describes each of the Web Management software screens. IP Setup I P Setup > General Configuration 7 8 B In the General Configuration, you will set the general system-based parameters. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 26: General Configuration

    Submit Button Click the Submit button to save these settings. Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 27 Username to one of your choosing. Submit Button Click the Submit button to save these settings. Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 28 DDNS service. Submit Click the Submit button to save these settings. Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 29 Set the start month to use during Daylight Saving mode. Default is March. Start Day: Set the start weekday to use during Daylight Saving mode. Default is Sunday. Start Time: Set the start time to use during Daylight Saving mode. Default is 02:00 (hh:mm). Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 30 After clicking the Add button, the network or host is added and displays at the bottom of the screen. Delete: You will have the option to delete Any and WAN Interface in the Options window once it is added. Click on Delete in the Options window. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 31: Ip Setup > Gps Configuration

    & and $ are invalid characters. The ID must follow the standard NMEA sentence structure. Refer to the Universal IP AT Commands Reference Guide provided on your product CD for sentence structure. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 32 "OK\r\n" read: "&&rcell$GPGGA,193038.002,4505.9798,N,09311.7646,W,1,10,1.0,230.2,M,-29.0,M,,0000*6B\r\n" read: "&&rcell$GPGSA,A,3,13,07,03,05,19,06,23,08,16,10,,,1.8,1.0,1.5*3C\r\n" read: "&&rcell$GPGSV,3,1,12,07,60,309,31,13,59,201,30,03,54,082,30,19,51,135,28*75\r\n" read: "&&rcell$GPGSV,3,2,12,06,42,064,21,23,34,177,25,08,24,297,20,16,18,060,20*70\r\n" read: "&&rcell$GPGSV,3,3,12,10,13,285,31,05,07,320,28,24,07,086,26,21,01,028,*7E\r\n" read: "&&rcell$GPGLL,4505.9798,N,09311.7646,W,193038.002,A,A*4B\r\n" read: "&&rcell$GPRMC,193038.002,A,4505.9798,N,09311.7646,W,000.0,117.3,220710,,,A*7E\r\n" read: "&&rcell$GPVTG,117.3,T,,M,000.0,N,000.0,K,A*09\r\n" read: "&&rcell$GPGGA,193040.002,4505.9796,N,09311.7646,W,1,10,1.0,230.1,M,-29.0,M,,0000*69\r\n" read: "&&rcell$GPGSA,A,3,13,07,03,05,19,06,23,08,16,10,,,1.8,1.0,1.5*3C\r\n" read: "&&rcell$GPGSV,3,1,12,07,60,309,32,13,59,201,29,03,54,082,31,19,51,135,28*7F\r\n" read: "&&rcell$GPGSV,3,2,12,06,42,064,22,23,34,177,26,08,24,297,19,16,18,060,21*7B\r\n" read: "&&rcell$GPGSV,3,3,12,10,13,285,32,05,07,320,28,24,07,086,25,21,01,028,*7E\r\n" read: "&&rcell$GPGLL,4505.9796,N,09311.7646,W,193040.002,A,A*4A\r\n" read: "&&rcell$GPRMC,193040.002,A,4505.9796,N,09311.7646,W,000.0,117.3,220710,,,A*7F\r\n" read: "&&rcell$GPVTG,117.3,T,,M,000.0,N,000.0,K,A*09\r\n" Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 33: Ppp

    Address translation of packets arriving from the WAN is also disabled. ● Any DNAT Configuration previously setup in the DNAT Configuration screen is disabled. This prevents the user from adding any DNAT rules, which if allowed would defeat the purpose of enabling Routing. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 34: Icmp Keep Alive Check

    G2 models, is not recommended as it may adversely affect the performance. Submit Button Click the Submit button to save these settings. Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 35 Ring with CLI EV2-EN2* AT+CLIP=1 Ring with CLI EV2-EN2- GP* AT+CLIP=1 Ring with CLI *Does NOT support Wakeup On Call using SMS at this time. Submit: Click the Submit to save these settings Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 36 Click the Submit button to save the Acknowledgement Configuration. You must click Save and Restart once you have completed and submitted all the screens on which you have made changes. The device will save all the settings and reboot the PC. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 37 If a username and password are required, your wireless provider would have given them to you when you activated your account. Modem Configuration ● Make sure your Dial Number is entered correctly: For GSM models, the Dial Number is *99***1# For CDMA models, the Dial Number is #777 Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 38 When no initialization string is configured, regular functionality of the router is retained. Submit: Click the SUBMIT button to save this setting. Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 39 Make a TCP connection to port 80 (same as the Web Admin port) and send data as: GET /atinfor.html HTTP/1.1 Then press Enter twice. ● Refer to the AT Command Reference Guides on the product CD for other commands. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 40: Networks & Services

    Enter the Network Mask of the Network/Host. For Host addresses, the mask is entered as 32. Note: See Appendix A -- Table of Commonly Supported Subnets. Add Button: Click the Add button. The defined network is added and will display at the bottom of the screen. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 41 Destination Port: Enter the name of the Destination Port for the service. Add Button: Click the Add button. The new service is added and will display on the screen. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 42: Packet Filter

    Packets matching the rule; i.e., the corresponding source address, destination address, and service will be logged. Add Button: Click the Add button. The defined packet filter rule is added and will display at the bottom of the screen. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 43 S-Port / Client – Enter the source port for this service. Example: 1:65535 D-Port / Server – Enter the destination port for this service. Example: 7700 Add – Click the Add button to save this configuration. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 44 Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes. The device will save all the settings and reboot the PC. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 45 ICMP on the Lan, Wan, and Forward are enabled by default. Submit Click the Submit button to save these settings. Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 46: Gre Tunnels

    Enter the FQDN (Fully Qualified Domain Name) for the Remote IP, which can be either the IP Address or an FQDN. Add Button: Click the Add button. The defined GRE tunnel configuration is added and will display at the bottom of the screen. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 47 Configuration. The tunnel configuration must be completed before setting the GRE route configuration. Add Button: Click the Add button. The defined GRE route configuration is added and will display at the bottom of the screen. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 48: Dhcp Server

    Click the Add button. The address range is added and will display in the table at the bottom of the screen. Once the range displays, you can delete if necessary. Note: See Appendix A – A Table of Commonly Supported Subnets. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 49 Enter the fixed IP address to be assigned. Add: Click the Add button. The addresses are added and will display in the table at the bottom of the screen from where they can be deleted or changed. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 50: Ipsec

    Click the Add IKE Connection button. A screen displays for setting up an IKE connection. Add Manual Connection Click the Add Manual Connection button. A separate screen displays for setting up a manual connection. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 51: Add An Ike Connection

    The default value is one hour and the maximum is 24 hours. Number of Retries Specify the number of retries for the IPSec tunnel. Enter zero for unlimited retries. Local WAN IP This is the interface initiating the IPSec tunnel. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 52 Check this option to enable broadcasts over the connection. It will allow computers on the network to share Microsoft file and printer sharing information. S ave Button 1 0 3 B 1 1 3 B Click the Save button to save these settings. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 53 SA under which a packet will be processed. The SPI Base is a number needed by the manual keying code. Enter any 3-digit hexadecimal number, which is unique for a security association. It should be in the form 0xhex (0x100 Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 54 Check this option to enable broadcasts over the connection. It will allow computers on the network to share Microsoft file and printer sharing information. S ave Button 1 0 4 B 1 1 4 B Click the Save button to save these settings. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 55: S Erial-Port

    Sets the timeout value for the serial terminal of how long it should wait before IP transmission. The default is 1-second. S ubmit Button 1 0 5 B 1 1 5 B Click the Submit button to save these settings. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 56 The other terminating sequences are: DTR-toggle or Always-On. DTR-toggle: If DTR status goes low, the connection terminates. Always-On: Sets the terminate sequence as Always-on. S ubmit Button 1 0 0 B Click the Submit button to save these settings. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 57 If DTR status goes low, the connection terminates. Always-On: Sets the terminate sequence as Always-on. S ubmit Button 1 0 8 B 1 3 6 B Click the Submit button to save these settings. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 58: Tools

    A Firmware Upgrade will take at least 4 minutes while the firmware is downloaded. Do not cycle power during this time. ● DO NOT perform firmware upgrade remotely via the Cellular wireless connection. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 59: 1 B T Ools > Load Configuration

    Click the Find, Save, or Cancel buttons as desired. The More Info displays Microsoft’s Internet Explorer Help on downloading files. T ools > Save Configuration 5 1 B Click this option to save the configuration. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 60: S Tatistics & Logs

    S tatistics & Logs 4 0 B 4 0 B 8 0 B S tatistics & Logs > System Information 5 2 B This is an example of the Statistics & Logs System Information Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 61: 3 B 8 1 B S Tatistics & Logs > Ethernet

    Chapter 4 – Using the Web Management Software 8 1 B S tatistics & Logs > Ethernet 5 3 B This is an example of the Ethernet Statistics & Logs screen. It shows Ethernet statistics. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 62: 4 B 8 2 B S Tatistics & Logs > Ppp

    Chapter 4 – Using the Web Management Software 8 2 B S tatistics & Logs > PPP 5 4 B This is an example of the PPP Statistics & Logs screen. It shows PPP statistics when PPP is enabled. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 63: 5 B 8 3 B S Tatistics & Logs > Ppp Trace

    Statistics & Logs > DHCP Statistics This is an example of the DHCP Statistics & Logs screen. It shows the statistics of DHCP leases. Statistics & Logs > GRE Statistics This screen displays the statistics of active tunnels. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 64: 7 B 8 6 B S Tatistics & Logs > Modem Information

    5 9 B This screen displays the TCP/UDP Client Live Log. 8 9 B S tatistics & Logs > TCP/UDP Server Live Log 6 0 B This screen displays the TCP/UDP Server Live Log. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 65: 1 B 9 0 B S Tatistics & Logs > Ipsec Live Log

    9 0 B S tatistics & Logs > IPSec Live Log 6 1 B This screen displays the IPSec Live Log. 9 1 B S tatistics & Logs > IPSec Log Traces 6 2 B This screen displays the IPSec Log Traces. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 66: A Ppendix A - Commonly Supported Subnets Reference Table

    N.N.N.144 N.N.N.145-150 N.N.N.151 N.N.N.152 N.N.N.153-158 N.N.N.159 N.N.N.160 N.N.N.161-166 N.N.N.167 N.N.N.168 N.N.N.169-174 N.N.N.175 N.N.N.176 N.N.N.177-182 N.N.N.183 N.N.N.184 N.N.N.185-190 N.N.N.191 N.N.N.192 N.N.N.193-198 N.N.N.199 N.N.N.200 N.N.N.201-206 N.N.N.207 N.N.N.208 N.N.N.209-214 N.N.N.215 N.N.N.216 N.N.N.217-222 N.N.N.223 N.N.N.224 N.N.N.225-230 N.N.N.231 Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 67 N.N.N.212 N.N.N.213-214 N.N.N.215 N.N.N.216 N.N.N.217-218 N.N.N.219 N.N.N.220 N.N.N.221-222 N.N.N.223 N.N.N.224 N.N.N.225-226 N.N.N.227 N.N.N.228 N.N.N.229-230 N.N.N.231 N.N.N.232 N.N.N.233-234 N.N.N.235 N.N.N.236 N.N.N.237-238 N.N.N.239 N.N.N.240 N.N.N.241-242 N.N.N.243 N.N.N.244 N.N.N.245-246 N.N.N.247 N.N.N.248 N.N.N.249-250 N.N.N.251 N.N.N.252 N.N.N.253-254 N.N.N.255 Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 68: A Ppendix B - Cellular Information

    869 to 894 MHz 925 to 960 MHz 1805 to 1880 MHz 1930 to 1990 MHz Frequency TX 824 to 849 MHz 880 to 915 MHz 1710 to 1785 MHz 1850 to 1910 MHz Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 69: Gsm Antenna Requirements/Specifications

    40mA Max GPS Antenna Requirements/Specifications Frequency 1575MHz Impedance 50 Ohms VSWR 1.5db Input voltage 3.0V +/- 0.3V GPS TIS The total isotropic sensitivity (TIS) at the antenna shall be no less than -147 dBm Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 70: Antennas Available From Multi-Tech Systems, Inc

    Mag Mount 850/1900 MHz 1/4 Wave Cellular Antenna, 4" ANCF2-10MMQW Mag Mount 850/1900 MHz 1/4 Wave Cellular Antenna, 4" ANCF2-50MMQW GPS Description Part Number Mag Mount GPS Antenna, 5 Meter Cable ANGPS-1MM Mag Mount GPS Antenna, 5 Meter Cable ANGPS-10MM Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 71: A Ppendix C - Regulatory Compliance

    Industry Canada This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement Canadien sur le matériel brouilleur. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 72: A Ppendix D - Waste Electrical And Electronic Equipment

    For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or where you purchased the product. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 73: A Ppendix E - Environmental Information

    Lead usage in some components is exempted by the following RoHS annex; therefore, higher lead concentration could be found. Lead in high melting temperature type solders (i.e., tin-lead solder alloys containing more than 85% lead). Lead in electronic ceramic parts (e.g., piezoelectronic devices). Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 74: China Rohs

    (PB) (Hg) (CR6+) (PBDE) (CD) (PBB) 印刷电路板 电阻器 电容器 铁氧体磁环 继电器/光学部件 二极管/晶体管 振荡器和晶振 调节器 电压传感器 变压器 扬声器 连接器 螺丝、螺母以及 其它五金件 交流-直流电源 软件/文档 CD 手 手 手 手 手 底盘 表示所有使用类似材料的设备中有害/有毒物质的含量水平高于 SJ/Txxx-2006 限量要求。 表示不含该物质或者该物质的含量水平在上述限量要求 Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 75: Reach Statement

    This data is controlled as a part of a formal quality system and will be made available upon request. Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 76: Appendix F - Sprint Activation Failure Corrective Action

    3. Wait 10 seconds, if auto activation starts, the modem will automatically restart the activation sequence. If so you are done with your corrective action. 4. If the auto activation still has not started, perform the manual activation process to determine if the modem is defective. Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 77 If you did get the above sequence, you can now try a data connection to verify that you are activated. ● If the data connection fails, then contact Sprint and check on the account status. ● If you still need assistance, then contact Multi-Tech Support at support.multitech.com Multi-Tech Systems, Inc. MultiModem rCell User Guide...

  • Page 78: Index

    DNAT example ................38 Modem Information ............. 61, 62 Dynamic DNS configuration ............26 NAT configuration ..............29 EMC, Safety, and R&TTE Directive Compliance ......66 Navigating .................. 21 Ethernet ports caution ..............6 Multi-Tech Systems, Inc. MultiModem rCell User Guide...
  • Page 79 ................25 Wakeup on Call ................31 Save configuration in Tools ............54 Wakeup on Call Examples ............ 32, 33 Screen parts ................22 Wizard Setup ................ 18, 19 Select encryption method ............48 Multi-Tech Systems, Inc. MultiModem rCell User Guide...

Table of Contents