Multitech MultiModem rCell User Manual page 53

Chapter 3 – Using the Web Management Software
Init Strings: Configure the router initialization strings. These init strings need to be specific to the integrated
cellular modem. Some initialization may be required for the integrated cellular modem to accept SMS for
'Wakeup on Call'. Init-num can range from 1-5. The default is NULL. Refer to the following table for examples of
Init Strings depending on model.
Model Init 1
C1-EN2-GP
E1-EN2-GP AT+CMGF=1
G2-EN2-GP AT+CMGF=1
H5-EN2*
H5-EN2- GP*
EV2-EN2*
EV2-EN2- GP*
*Does NOT support Wakeup On Call using SMS.
Submit: Click Submit to save these settings.
MultiModem rCell User Guide
Init 2 Init 3
AT+CNMI=2,2,0,0,1
AT+CSMS=1 AT+CNMI=2,2,0,0,1
AT+CSMS=1 AT+CNMI=2,2,0,0,1
AT+CLIP=1
AT+CLIP=1
AT+CLIP=1
AT+CLIP=1
Init 4 Ack
AT+CLIP=1 AT+CNMA
AT+CLIP=1 AT+CNMA
AT+CLIP=1 AT+CNMA
Comment
Ring with CLI, SMS with ACK
Ring with CLI, SMS with ACK
Ring with CLI, SMS with ACK
Ring with CLI
Ring with CLI
Ring with CLI
Ring with CLI
53