Chapter 3 – Using the Web Management Software
PPP, Modem Commands Parameters
You can configure modem commands to allow an external application to query modem information.
●
The application can use the URL
assigned to the integrated cellular modem after the PPP connection is established.
●
You can also display the results of up to ten AT commands.
Modem AT Commands Configuration Group
These commands are sent when a PPP connection to the network is initiated.
Useful HSDPA AT commands include:
Command
Description
AT+CGSN
Product Serial Number
AT+CGMR
Software Version
AT+CNUM
Wireless Subscriber Number
AT+COPS?
Network Information (Operator)
AT+CREG?
Network Registration
AT+CSQ
Signal Quality
Retrieving Modem Information without using a browser:
To obtain the integrated cellular modem information without using a browser:
Make a TCP connection to port 80 (same as the Web Admin port) and send data as:
1.
GET /atinfor.html HTTP/1.1
Press Enter twice.
2.
Refer to the AT Command Reference Guides for other commands.
MultiModem rCell User Guide
H TTP://xxx.xxx.xxx.xxx/modeminfor.html
U
to determine the IP address that is currently
U
59
Need help?
Do you have a question about the MultiModem rCell and is the answer not in the manual?