Ip Setup, Sntp Configuration Parameters; General Configuration Group; Time Zone Configuration Group - Multitech MultiModem rCell User Manual
Intelligent wireless router
Hide thumbs
Also See for MultiModem rCell:
- User manual (79 pages) ,
- Quick start manual (16 pages) ,
- User manual (64 pages)
Table of Contents
Advertisement
Chapter 3 – Using the Web Management Software
IP Setup, SNTP Configuration Parameters
General Configuration Group
SNTP Client
Enable or disable the SNTP Client to contact the configured server on the UDP port 123 and set
the local time. The default is Disable.
Server
Enter the SNTP server name or IP address that the SNTP Client contacts to update the time. No
default.
Polling Time
Enter the time, in minutes, after which the SNTP client requests the server to update the time.
Default is 300 minutes.
Time Zone Configuration Group
Time Zone:
Enter the time zone. Default is UTC (Universal Coordinated Time, Universal Time). See the following
website for Time Zone information:
http://wwp.greenwichmeantime.com/info/current-time.htm
Time Zone Offset:
Enter +/- hh:mm. Default is +00:00. Offset is the amount of time varying from the standard
time of a Time Zone.
MultiModem rCell User Guide
43
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiModem rCell and is the answer not in the manual?