Related Documentation; Safety Warnings; Ethernet Ports Caution; Handling Precautions - Multitech MultiModem rCell User Manual

Related Documentation

The following table describes additional documentation for each model.
Model
MultiModem MTCBA-E1-EN2 (EDGE)
MultiModem MTCBA-G2-EN2 (GPRS)
MultiModem MTCBA-C1-EN2 (CDMA)
MultiModem MTCBA-H5-EN2 (HSPA)
MultiModem MTCBA-EV2-EN2
(EV-DO)

Safety Warnings

Ethernet Ports Caution

Ethernet ports are not designed to be connected to a Public Telecommunication Network or used outside the
building.

Handling Precautions

To avoid damage due to the accumulation of static charge, use proper precautions when handling any cellular
device. Although input protection circuitry has been incorporated into the devices to minimize the effect of static
build-up, use proper precautions to avoid exposure to electronic discharge during handling and mounting the
device.
Caution: Maintain a separation distance of at least 20 cm (8 inches) between the transmitter's antenna and the
body of the user or nearby persons. The modem is not designed for or intended to be used in portable
applications within 20 cm (8 inches) of the user's body.
8
Additional Documentation
You can configure the MultiModem MTCBA-E1-EN2 wireless router
using the EDGE AT Commands. For more information refer to the
Reference Guide for the MultiModem Wireless EDGE Modems, part
number S000474x.
You can configure the MultiModem MTCBA-G2-EN2 wireless modem
using the GPRS AT Commands. For more information, refer to the
Reference Guide for the MultiModem Wireless GPRS Modems, part
number S000463x
You can configure the MultiModem MTCBA-C1-EN2 wireless router
using the CDMA-C1 AT Commands. For more information, refer to the
Reference Guide for the MultiModem Wireless CDMA-C1 Modems, part
number S000478x.
You can configure the MultiModem MTCBA-H5-EN2 wireless router
using the HSPA AT Commands. These commands are documented in the
Reference Guide part number S000528x.
You can configure the MultiModem MTCBA-EV2-EN2 wireless router
using the EV-DO AT Commands. These commands are documented in
the Reference Guide part number S000482x.
Chapter 1 – Product Overview
MultiModem rCell User Guide