Ppp, Power-On Configuration Parameters - Multitech MultiModem rCell User Manual

To save the changes, click Submit.
2.
On the PPP > Wakeup-on-Call
3.
Wakeup-on-Call Configuration
Select Enable for Wakeup-on-Call.
●
Set the Time Delay. You can use the 10 second default.
●
Enter the Init Strings:
●
To set Wakeup Init String 1 type AT+CLIP=1.
●
To save settings, click Submit.
●
Caller ID Configuration
To add a caller's ID, to the Caller ID list, type that id.
●
Click Add.
●
To save each Caller ID as it is entered to the Caller ID list, click Add.
●
To ensure your changes go into effect, click Save and Restart. The device saves all the settings and
●
reboots the computer.

PPP, Power-On Configuration Parameters

The Power-On Configuration feature allows you to set an initialization string that is sent to the router upon boot up.
Power-On Init String: You can enter a string of 0 to 40 characters that is sent to the router upon boot up. All
commands initializes before you proceed with regular PPP related activity.
Note: When no initialization string is configured, regular functions of the router is retained.
To save this setting click SUBMIT.
To ensure your changes go into effect, click Save and Restart.
58
screen, set up the following parameters:
Chapter 3 – Using the Web Management Software
MultiModem rCell User Guide