Reducing Or Enlarging A Copy - Canon MG8100 series On-Screen Manual

Advanced Guide >
Printing Using the Operation Panel of the Machine
U033

Reducing or Enlarging a Copy

You can not only change the magnification optionally on the Copy standby screen but also select the
preset-ratio copying or fit-to-page copying.
The LCD below is displayed when you touch the right Function button in the Copy standby screen. Select
the reduction/enlargement method from Magnif..
Note
Some of reduction/enlargement methods are not available depending on the copy menu.
Fit to page
The machine automatically reduces or enlarges the image to fit the page size.
The setting in Magnif.: Fit to page
Note
When you select Fit to page, the page size may not be detected correctly depending on the
original. In this case, select the setting other than Fit to page.
Preset ratio
You can select one of the preset ratios to reduce or enlarge copies.
Select the appropriate ratio for size of original and page size.
The setting in Magnif.: 70% A4->A5/86% A4->B5/94% A4->8.5x11/115% B5->A4/141% A5->A4/156%
5x7->8.5x11/183% 4x6->8.5x11
Note
Some of preset ratios are not available depending on the country or region of purchase.
Ratio specified copy
By touching the button on the Copy standby screen, you can specify the copy ratio as a
percentage to reduce or enlarge copies.
>
Copying > Reducing or Enlarging a Copy