Canon MG8100 series On-Screen Manual page 779

Close
Closes ScanGear.
Toolbar
Toolbar
You can adjust or rotate preview images. The buttons displayed on the Toolbar vary by view.
When Select Source is other than film and in thumbnail view
When Select Source is other than film and in whole image view
When Select Source is film and in thumbnail view
When Select Source is film and in whole image view
(Thumbnail) /
Switches the view in the Preview area when document type is other than film.
Preview Area
(Film Thumbnail) /
Switches the view in the Preview area when document type is film.
Preview Area
(Mirror)
Inverts the preview image horizontally.
- The result will be reflected in the scanned image.
- The image returns to its original state when you preview again.
(Rotate Left)
Rotates the preview image 90 degrees counter-clockwise.
- The result will be reflected in the scanned image.
- The image returns to its original state when you preview again.
(Rotate Right)
Rotates the preview image 90 degrees clockwise.
- The result will be reflected in the scanned image.
- The image returns to its original state when you preview again.
(Auto Crop)
Displays and adjusts the cropping frame automatically to the size of the document displayed in
the Preview area. The scan area is reduced every time you click this button if there are
croppable areas within the cropping frame.
(Check All Frames)
This button is available when two or more frames are displayed.
(Whole Image)
(Whole Film Image)