Canon MG8100 series On-Screen Manual page 916

Advanced Guide >
Changing the Machine Settings
Settings on the LCD
U066
Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extended copy amount as an example.
1.
Make sure that the machine is turned on.
2.
Select Setup on the HOME screen.
Note
For details on how to select a menu on the HOME screen, refer to
3.
Select Device settings, then touch the
The Device settings screen is displayed.
4.
Use the button to select the setting item, then touch the
The setting screen for the selected item is displayed.
5.
Use the button to select the menu, then touch the
6.
Use the button to select the setting item, then touch the
> Changing the Machine Settings on the LCD
button.
OK
OK
> Changing the Machine
Overview of the Machine .
OK button.
button.
button.
OK