Loading Originals - Canon MG8100 series On-Screen Manual

>
Contents Loading Paper / Originals
C077

Loading Originals

This section describes the procedure to load originals on the Platen Glass.
Loading Originals
How to Load Originals for Each Function
Originals You Can Load
You may have to load the original in a different position depending on the function you selected in Copy,
Photo reprint, or Scan. Load the original in the correct position according to the selected function. If you
do not load the original correctly, it may not be scanned properly.
Important
After loading the original on the Platen Glass, be sure to close the Document Cover before starting
to copy or scan.
Note
For details on loading films, see
Loading Originals
You can load originals to copy or scan on the Platen Glass.
1.
Load an original on the Platen Glass.
Open the Document Cover.
(1)
Important
Do not place any object on the Document Cover. It will fall into the Rear Tray when the
Document Cover is opened and cause the machine to malfunction.
When opening or closing the Document Cover, do not touch the buttons on the Operation
Panel. Doing so may result in an unexpected operation.
Load the original WITH THE SIDE TO SCAN FACING DOWN on the Platen
(2)
Glass.
Make sure of the proper position to load the original for each function.
See How to Load Originals for Each Function
Important
Be sure to observe the following when loading the original on the Platen Glass.
- Do not place any objects weighing 4.4 lb / 2.0 kg or more on the Platen Glass.
- Do not put any pressure of 4.4 lb / 2.0 kg or more on the Platen Glass, such as pressing
down the original.
> Loading Originals
Loading the Films
.
.
Advanced Guide Troubleshooting