Canon MG8100 series On-Screen Manual page 840

3.
Select Device settings, then use the OK button to confirm the selection.
4.
Use the button to select Print settings, then use the
selection.
5.
Use the button to select Adjust disc print area, then use the
selection.
6.
Use the button to select Right/left or Top/bottom and use the
print area.
You can adjust the printing area by 0.003 inches / 0.1 mm between -0.03 inches / -0.9 mm
and +0.03 inches / +0.9 mm.
7.
Use the OK button to confirm the selection.
OK button to confirm the
OK button to confirm the
button to adjust the
Page top