Canon MG8100 series On-Screen Manual page 570

Advanced Guide >
Scanning >
S103
Scanning Film
This machine supports 35 mm negative and positive film strips (standard state of developed film, with
six frames in each strip) as well as 35 mm mounted positive slides (one frame per mounted slide).
Up to six film strip frames or four mounted slide frames can be scanned continuously.
Note
To scan at a resolution higher than 4800 dpi, scan from the Advanced Mode tab of ScanGear
(scanner driver).
Scanning Film in Advanced Mode
35 mm Film Strip
1.
Place the film on the Platen.
Placing Film
2.
Start MP Navigator EX and open the Navigation Mode screen.
Starting MP Navigator EX
3.
In Scan/Import, click Film.
4.
Click Specify... to set the document size and scanning resolution as required.
When setting is completed, click OK.
Scan Settings Dialog Box (Film)
Important
Scanning with the Bundled Application Software
35 mm Mounted Slides
> > Scanning Film
Let's Try Scanning