Setting Items - Canon MG8100 series On-Screen Manual

Advanced Guide >
Printing Using the Operation Panel of the Machine
U032

Setting Items

When the Copy standby screen is displayed, touch the right Function button to change the copy settings
such as page size, media type, and print quality.
Use the button to change the setting item, and the
Note
Depending on the copy menu, some setting items cannot be selected. This section describes the
setting items in Standard copy.
The setting item cannot be selected is displayed grayed out.
Depending on the setting item, some settings cannot be specified in combination with the setting of
other setting item or the copy menu. If the setting cannot be specified in combination is selected,
Error details is displayed on the LCD. In this case, touch the left Function button to confirm the
message, then change the setting.
The settings of the page size, media type, etc. are retained even if the machine is turned off.
When copying starts in the copy menu that is not available with the specified setting, The specified
function is not available with current settings. is displayed on the LCD. Change the setting, follow
the on-screen instructions.
1.
Magnif. (Magnification)
Specify the reduction/enlargement method.
Reducing or Enlarging a Copy
2.
Intensity
Specify the intensity. When Auto is selected, the intensity is adjusted automatically according to the
originals loaded on the Platen Glass. Auto is displayed on the slide bar for the intensity on the Copy
standby screen.
Important
When Auto is selected, touching the
screen. If you use the
>
Copying
button to change the setting.
button can change the intensity on the Copy standby
button to move the cursor on the center of the slide bar, auto
> Setting Items