Canon MG8100 series On-Screen Manual page 787

- Focus Frame (thick blue outline): The displayed settings will be applied.
- Selected Frame (thin blue outline): The settings will be applied to the Focus Frame and
Selected Frames simultaneously. You can select multiple images by clicking them while
pressing the Ctrl key.
- Unselected (no outline): The settings will not be applied.
When (Whole Image) or
When document type is Platen, items on the Platen are scanned and displayed as a single image.
When document type is film, the whole film image is displayed. All portions in the cropping frames
will be scanned.
Whole image view (Full Platen)
Note
If frames are not detected (for example, only four frames out of six frames are displayed) due to
the image color of the film, display the whole image and scan.
Note
You can specify the scan area (cropping frame) on the displayed image. In thumbnail view, you can
only create one cropping frame per image. In whole image view, you can create multiple cropping
frames.
Adjusting Cropping Frames
Related Topic
Scanning in Advanced Mode
Scanning Film in Advanced Mode
(Whole Film Image) is displayed on the Toolbar
Whole film image view
Page top