Setting The Printer - Canon MG8100 series On-Screen Manual

Advanced Guide >
About Bluetooth Communication
B008

Setting the Printer

This section describes the procedures for checking the settings of the Bluetooth unit on the LCD of the
printer in preparation for Bluetooth printing.
If you need more information about the Bluetooth settings, see
1.
Make sure that the Bluetooth unit is attached and the printer is turned on.
For information about how to attach the Bluetooth unit, see
Printer .
2.
Display the Bluetooth settings screen on the LCD.
For information about how to display the Bluetooth settings screen, refer to
.
Settings on the LCD
Note
If the Bluetooth settings screen is not displayed on the LCD, the Bluetooth unit may not be
attached correctly. Remove the Bluetooth unit from the printer and attach it once again.
For details, see Attaching to and Removing from the Printer
If the Bluetooth settings screen is not yet displayed, the Bluetooth unit may be faulty. In this
case, contact the service center.
3.
Select Select device name.
The Select device name screen is displayed.
4.
Check the device name.
The device name is necessary to register the printer as a Bluetooth device. Be sure to note the
device name.
Note
Printing Data via Bluetooth Communication
>
Setting Bluetooth Printing
Attaching to and Removing from the
.
> Setting the Printer
.
Changing the Machine