Part Of The Page Is Not Printed - Canon MG8100 series On-Screen Manual

Advanced Guide >
Troubleshooting
U312

Part of the Page Is Not Printed

Check: When performing automatic duplex printing, the reason below is
possible.
When performing automatic duplex printing, the printable area at the top of the page will be 0.08
inches / 2 mm narrower than the usual.
For this reason, the bottom of the page may not be printed. To prevent this, select Use reduced
printing from the printer driver.
Important
Reduced printing may affect the layout depending on your document.
1.
Open the printer driver setup window.
Opening the Printer Driver Setup Window
Click Here:
* Before clicking here to open the printer driver setup window, quit the running application
software.
2.
Click Print Area Setup in the Page Setup sheet and select Use reduced printing.
> Print Results Not Satisfactory
Printer Driver
> Part of the Page Is Not Printed
Page top