Security Settings - Canon MG8100 series On-Screen Manual

Advanced Guide >
About Bluetooth Communication
B014
Bluetooth settings Screen
1.
Select device name
Displays the device name of the printer to which the Bluetooth unit is attached.
Select device name Screen
2.
Access refusal setting
Selecting ON will disable searching of this printer by a Bluetooth-compatible device.
Access refusal setting Screen
3.

Security settings

Select Enable and then specify the security mode to activate the passkey set on the Change
passkey screen.
Security settings Screen
4.
Change passkey
You can change the passkey. The passkey refers to an identification number to be determined. It is
used to prevent unwanted access from other Bluetooth devices. The initial value is set to 0000.
Change passkey Screen
Select device name Screen
Allows you to set the device name of the printer on a Bluetooth device.
In the example used for this explanation, the model name is set to MG5200 series.
When a model other than MG5200 series is used, whatever appears in place of "MG5200"
becomes the model name use.
Ex:
When you select MG5200 series-2, the printer name displayed on the Bluetooth device is Canon
MG5200 series-2.
The initial value is set to MG5200 series-1.
> Bluetooth Settings > Bluetooth settings Screen