Canon MG8100 series On-Screen Manual page 468

copying.
8.
Confirm the message, then set the printable disc.
Use the left Function button to see how to set the printable disc.
9.
Use the button to start copying.
OK
The machine starts copying.
Note
Do not see the light source directly while copying is in progress.
Use the Stop button to cancel copying.
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or
expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink
has dried.
To keep the print quality at an optimal level, it is recommended to stop printing discs once
every ten discs when printing more than ten discs continuously.
To stop the printing operation, detach the Disc Tray from the printer, then close the Inner Cover.
After approximately three minutes have elapsed, open the Inner Cover, attach the Disc Tray to
the printer, then resume printing.
Page top