Advanced Guide
>
About Disc Label Printing
D008
An Error Message Is Displayed on the LCD
If an error message is displayed on the LCD, take the corresponding action described below.
Message
Open the inner cover, set the disc tray and press
OK.
>
Troubleshooting
> An Error Message Is Displayed on the LCD
If the Inner Cover is closed when starting disc
label printing, open the Inner Cover with the
Scanning Unit (Cover) closed, set the Disc Tray,
and then use the
dismiss the error.
Do not open or close the Inner Cover while
printing is in progress. Doing so may damage the
machine.
Action
OK
button on the machine to
Page top