Starting Scangear (Scanner Driver) - Canon MG8100 series On-Screen Manual

Advanced Guide >
Scanning >
ScanGear (Scanner Driver) > Starting ScanGear (Scanner Driver)
S202

Starting ScanGear (Scanner Driver)

Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning.
ScanGear can be started from MP Navigator EX or an application.
Note
To scan via a network connection, start MP Navigator EX and set up the network environment.
Network Scan Settings
Starting from MP Navigator EX
Navigation Mode Screen
Follow these steps to start ScanGear from the Navigation Mode screen of MP Navigator EX.
Start MP Navigator EX and open the Navigation Mode screen.
1.
Starting MP Navigator EX
In Scan/Import, click Photos/Documents (Platen).
2.
The Scan/Import window opens.
Select the Use the scanner driver checkbox, then click Open Scanner Driver.
3.
The ScanGear screen appears.
One-click Mode Screen
Follow these steps to start ScanGear from the One-click Mode screen of MP Navigator EX.
Start MP Navigator EX and open the One-click Mode screen.
1.
Starting MP Navigator EX
Scanning with Other Application Software
> Scanning with Advanced Settings Using