Canon MG8100 series On-Screen Manual page 41

Use the [ ] or [ - ] button to specify the number of copies.
(3) +
Note
If appears at the upper left of the photo, it may not have been scanned properly. Touch
the left Function
procedures from step 2 to scan the photo again.
Touch the center Function button to display the trimming screen, and crop photos.
See Cropping Photos
Repeat the procedures of (2) and (3) to specify the number of copies for each
(4)
photo.
Confirm the number of sheets to be used for printing the selected photos.
(5)
4.
Start printing.
Touch the right Function button to select Print settings, and confirm the page
(1)
size, media type, print quality, etc.
Here we confirm that 4"x6" (10x15cm) is selected for Page size and the type of loaded photo paper for
Type.
To change the settings, use the
or
button to select an option.
See Changing the Settings
Note
If Manual correction is selected for Photo fix on the Print settings screen, touch the right
Function button to select Advanced, and correct a photo manually.
See
Using Various Functions
The settings of the page size, media type, print quality, etc. are retained, and these
settings will appear next time when Photo reprint is selected even if the power is turned
off and on.
Touch the Color button to print in color, or the Black button to print in black &
(2)
white.
The machine starts printing.
Remove the photos on the Platen Glass after printing is completed.
Note
Touch the Stop button to cancel printing.
You can exit Photo reprint and display the HOME screen, if you touch the
printing is completed.
button to select Rescan. Confirm the message, and repeat the
.
Scroll Wheel
or button (
.
.
) to select the item to change, and use the
HOME button after
Page top