Canon MG8100 series On-Screen Manual page 462

7.
Remove the first sheet of original from the Platen Glass, then load the second sheet
of original on the Platen Glass.
8.
Touch the button.
OK
The machine starts scanning the second sheet of original and copying.
Note
This copy menu can be used in combination with Two-sided copy.
If you use this copy menu in combination, you can copy four original pages on one sheet of paper.
In this case, two original pages are copied on each side of paper.
When you use this copy menu in combination, select 2-sided in 2-sided on the print settings
screen.
As the Document setting screen is displayed after scanning the second sheet of original is
complete, follow the on-screen instructions to scan the third and fourth sheet of original.
For details on Two-sided copy, refer to
If Device memory is full. Cannot continue process. appears on the LCD when scanning, set the
print quality to Standard or reduce the number of sheets of documents, then try copying again. If the
problem is not resolved, set the print quality to Fast and try copying again.
Copying onto Both Sides of the Paper (Two-sided copy)
.
Page top