Tandberg Data
2.2 Product Description
The StorageLoader has several features designed to increase the ease of use and
utility of the product, such as:
• Two removable magazines allow for easy management of data sets or
archival storage. For the StorageLoader each magazine has room for four
cartridges.
• A menu-driven operator control panel interface with backlit LCD provides
easy control for configuration and diagnostic activities.
• An Ethernet connection allows for management by an operator with a
standard web browser on a remote computer. The remote operator can do
most of the operations that can be done through the front panel, such as
monitoring the loader's status and downloading statistical and diagnostic
information.
For information on the installed tape drive; see the tape drive manuals referred to in
chapter 1.
2.2.1 Front Panel
The Front Panel includes the User Control Panel with LCD display, four Control
Buttons, two LED indicators and a Standby switch. The bezels of the two magazines
are also visible from the front.
Magazine
LED
front
indicator
bezel
s
Figure 2.2 Front panel of the StorageLoader
LCD – liquid crystal display
The display is a backlit 122 x 32, dot-matrix graphical display that can show four
lines of 20 characters.
In various modes of operation, the display panel screens and control buttons allow
you to do the following:
• Enter settings for StorageLoader configuration
• Issue operational commands
StorageLoader Installation and User Manual
Standby
LCD
Control
switch
display
buttons
General Information
Magazine
front
bezel
5
Need help?
Do you have a question about the StorageLoader and is the answer not in the manual?
Questions and answers