Maintenance; Figure 5.4 Remote Management Command Page - Tandberg Data StorageLoader Installation And User Manual

Tandberg Data
The other pull-down list shows the empty locations where it is possible to move the
cartridge to.

Figure 5.4 Remote Management Command Page

5.2.6 Maintenance Pages
On these pages it is possible to select predefined tests and actions in order to check
the reliability of the StorageLoader.
Diagnostics
• Clean the drive by importing a cleaning cartridge.
• If you choose Identify loader, the front panel display light will toggle on and
off for 15 seconds. This makes it easy to verify that you are connected to the
correct loader if several loaders are stacked.
• Test robotics by moving cartridges.
• Test robotics without moving cartridges.
Debugging
• Memory dump will download a snapshot of the system memory of the loader
to a file that can be sent to Tandberg Data's service for diagnostic purposes.
48
Remote Management
StorageLoader Installation and User Manual